KWP2000 Plus ECU REMAP Flasher

KWP2000 plus is a kind of ECU chip tunning.It can read and analyze the current ECU software and if it is needed,you can update it with a remapped file.Here we are going to talk about how to use this KWP2000 plus to read the data from a supported ECU and how to use it to write data to the supported ECU.

First,about reading the data.We need to connect the KWP2000 plus with the PC's USB port and also with the diagnostic port of the vehicle.Then run the communication software in the PC,and turn on the ignition key.After that,select the ECU type you want to read and you can also select the additional options.Last,click the button of "READ" to read the original data which are supported to be read,and you can also save the files to the hard disk then to edit them.

Next is writing data.The steps are the same as reading data until the step of selecting the ECU type.Now you should choose the ECU type that you wanna write from the list and also can select the additional options if you want.Then you need to click the button of "ERITE" and choose the file you want to write.Follow the instructions that diaplayed on the screen.When all the steps have done and you finished writing,then you can switch the ignition key to the position of "OFF" and you need to wait for ten seconds then you can start the engine again.

Video: 

For more ECU Tuning Tool or other OBD2 tools, please visit our home site: http://www.obd2life.com